Mr. Sticky's Cold-Bond Properties

Technical Bulletin Date Issued: 04/01/04 iPropBulColdBond

Mr. Sticky’s® Cold-Bond® Patent Pending

Description

Mr. Sticky’s® Cold-Bond® is a flexible, toughened, non-corrosive, structural adhesive specially designed for various applications and substrates, including bonding of ABS, PVC, ceramics metal, wood and cement. It has been formulated for application in cold temperatures while preserving superior exterior performance, gap filling, impact and fatigue resistance. It’s toughness, imparted by flexibility, causes the energy required to break a bond to be significantly higher than brittle epoxies. Lap Shear Psi, plus high break-energy Psi afford bonds strength/resiliency.

Typical Properties

Mixed Color White

Thixotrophy Non-sagging gel

Elongation (%) 100+

% Solids (by Volume) 100

Viscosity (@ R.T., cps) (Resin 245,000) (Hardener178,000) cps

Density (gr./cc)

Resin 1.25

Hardener 0.99

Mixing Ratio

(PBW) 1.27:1

(PBV) 1:1

Working Time (7 gr. Min) 15-30

Cure Cycle (at 23°C)

Handling Time 1-2 hours

Functional Cure 24 hours

Full Cure 7 days

Tensile Strength (Psi) 1,150+

Lap Shear (Psi)

ABS 800+

Aluminum 1,000+

Ceramic (compressive shear) 1,500+

Cold Rolled Steel 1,500+

Concrete (compressive shear) 2,000+

Copper 1,000+

Fiberglass gel coat 1,000+

PVC 1,400+

Wood (Douglas fir) (.005”gap 620 S.F.) (.020” gap 447 S.F.)

Wood (Red Oak) (.005”gap 690 C.F./ S.F.) (.020” gap 728 C.F./ S.F.)

Wood (Hard Maple) (.005”gap 1,001) (.020” gap 1,008)

Flexural Modulus (Psi) 8,000+